Joined in 2023 
82 
63 About this deal
Use the renter-friendly Ring No-Drill Mount for Ring Video Doorbell (2nd Generation) if you can't drill holes into your outside wall.
If installing on a masonry surface, mark four screw holes using the doorbell as a guide. Drill pilot holes using a 6mm drill bit. Insert the wall anchors, the drive the short mounting screws through the mounting plate into the wall anchors. If the wires are too short to reach the doorbell, use the wire extenders with the wire nuts found in Bag D. There are two types of screws that came with my Ring Video Doorbell (2nd Generation). What is each screw used for? Does Ring Video Doorbell (2nd Generation) use cellular data all the time or just when it's activated?
Ring Video Doorbell (2nd Generation) can be adjusted to point in directions other than straight forward through the use of a Wedge or Corner Kit. Your Ring Doorbell is compatible with doorbell systems supplying 8 to 24 VAC, 50/60Hz, 5VA to 40VA. CAUTION! Do not drill or drive screws into your home's electrical wiring. 2. Secure the wires to the terminals. If you have problems with video quality after installation, you may need to move your router closer to your door, or add a Ring Chime Pro. Learn more at ring.com/chime-pro.
The No-Drill Mount will be most effective on even and smooth surfaces. It may be difficult to adhere to shingles and rough stucco surfaces. It should not be mounted on glass. In all cases, the wall should be wiped clean before attaching the No-Drill Mount. If you want to angle the doorbell down for a better view, wedge kits are available at ring.com/accessories. Install your doorbell without connecting to an existing chime 1. Optional: Install the corner mount. CAUTION! If you use the wrong screws to secure the faceplate, you could damage the battery during installation, create a fire hazard, and be seriously injured. CAUTION! Do not drill or drive screws into your home's electrical wiring. 4. Insert the battery and secure the faceplate.
Site Customisation
Insert the included plastic anchors into the holes. You may need to use a hammer to get the anchors in. Ring Video Doorbell (2nd Generation) is compatible with b/g/n wifi networks operating on 2.4 GHz frequencies. No. The adhesive tape is designed for one-time use, but the mount comes with one set of additional tapes for re-installation. The No-Drill Mount uses double-sided adhesive to attach the plate to your wall so you can securely screw your Ring Video Doorbell directly onto the mounting plate — no power tools required.
Ring Video Doorbell (2nd Generation) is the next generation of the original Ring Video Doorbell. In addition to new video features such as Near Zone functionality, Ring Video Doorbell (2nd Generation) boasts 1080p video, improved night vision, improved audio quality and near motion zone detection. CAUTION! Do not drill or drive screws into your home's electrical wiring. 3. Insert the battery and secure the faceplate.No. The original Ring Video Doorbell will continue to work as normal and will continue to be supported by Ring.
Fully charge the built-in battery by plugging it into a USB power source using the provided orange cable. I have an unusually shaped front garden. How do I aim Ring Video Doorbell (2nd Generation) in a direction other than straight ahead? Note that you should set up your Ring Video Doorbell in your Ring app before mounting it to your home. Ring Video Doorbell (2nd Generation) is rated for temperatures ranging from -20 to 48 degrees C. Internet requirementsCAUTION! If you use the wrong screws to secure your Video Doorbell, you could damage the battery during installation, create a fire hazard, and be seriously injured. Ring Battery Video Doorbell Plus is compatible with all Ring Video Doorbell 3, 3 Plus and 4 accessories, including: With Ring Video Doorbell (2nd Generation), you’ll always be connected to your home, so you can watch over your property and answer the door from anywhere.
Great Deal 
New Comment