EASYJOINT Paving COMP Black 12.5K

Product Information

Continuously Wash the Paving With Lots of Water. The person with the hose should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of them so that the paving is always wet. This is particularly important in warm/hot weather conditions. Some concrete paving is made in moulds and has chamfered edges creating a 'V' shaped joint between two paving slabs, wider at the top than at the bottom. This gap shape can be the most challenging to work with and we recommend you carefully follow the instructions below. The great thing about Joint-IT products is that they are expert hardscape products. They offer the best possible combination of advanced technological formulations and environmentally friendly raw materials. All while promising a strong and effect solution for your paving needs. Utilise the same method when working with porcelain paving tiles as with working with stone or concrete. The base on which the porcelain is laid must be able to drain. If the base is non-permeable then EASYJoint Pro or EASYGrout should be used.

Whilst following the instructions carefully, if you do happen to make an error with EASYJoint, don’t worry, the only stain or picture framing that the jointing compound may potentially leave is linseed oil which will disappear and fade over time. By using lots of water when brushing the product in, it will ensure that any linseed oil will sit on top and simply get washed away! Detailed instructions on how to joint paving with our sweep in sand can be found inside the EASYJoint tub.Both the EASYJoint and Joint-IT products have their own benefits. If you are unsure of the right paving accessories for your needs, call our team. We have a friendly team of paving specialists that will help ensure you create the right paving for your needs. Whilst this is the preferred method of application it should not be used when ground temperatures are at or below zero. Zero Waste – Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2″ (50mm) or more of water The 'Neutral' colour option within the Joint-IT range is almost identical. It has the same pale shades and colours suitable for both dark and light pavers.

EASYJoint can be applied in virtually any weather conditions, however it is best practice to ensure that ground temperatures are greater than 3 degrees during the grout installation. Once installed, freezing conditions will not impair EASYJoint All Weather Jointing Mortar.

Please Note: This information is for guidance only, the above table is to be used as an estimate of the amount of EASYJoint required, we always recommend purchasing an additional 1-2 tubs to ensure that you have enough – it will also keep due to the unlimited shelf life.